Specializing in animal oil rendering, feed processing, harmless treatment equipment
12
2026
-
05
Precautions during the use of meat grinder
Clean all washable parts before use.
1. Clean all washable parts before use.
2. After confirming that the motor direction matches the direction of the meat grinder, power on and wait for the machine to operate normally before adding materials.
3. The addition of meat chunks must be uniform and not excessive, in order to avoid damaging the motor. If the machine is found to be running abnormally, the power should be immediately cut off, and the cause should be checked after stopping the machine.
4. If any faults such as leakage or ignition are found, the power should be cut off immediately and an electrician should be consulted for repair. It is not allowed to start the machine for repair without authorization.
5. Turn off the power after use. Then clean each component thoroughly, drain the water, and place it in a dry place for later use.
6. Before use, refer to the user manual requirements. Not strictly following the operating procedures, the consequences of any problems shall be borne by oneself.
Specializing in animal oil rendering, feed processing, harmless treatment equipment
CONTACT US
Beishili San Village, Mizhou Street, Zhucheng City, Weifang, Shandong, China
